Hobby & Verzamelartikelen van het thema Rails en treintoebehoren

Smoke generator for class 80, class 36, class 03.10 and „Württemberger C“/class 18.1 for analogue and digital locomotives.

From the starter set on with TRIX C Track: The layout's operations grow.

This track is the same length as the length of the wide radius turnouts.

Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

R1 = 360 mm

R2 = 437.5 mm

Removable roadbed slopes. This track section is required on both branches of the 62771 and 62772 wide radius curved turnouts.
R3 = 515 mm

R3 = 515 mm

R4 = 579.3 mm
Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

R5 = 643,6 mm
Parallel curve to Radius R4 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 133 cm / 52-3/8".

R9 = 1114.6 mm
Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Length 220 mm / 8-5/16".

Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Model Draaischijf, elektrisch aangedreven, met individuele elektrisch schakelbare spooruitgangen, met draaischijfschakelaar 6910. Lengte van de draaibrug 183 mm.

1 German Federal Railroad (DB) class 89 steam locomotive, 1 DB low side car with a tarp, 1 gondola.

This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings.

Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.

Radius 145 mm / 5-3/4". 45°, R1

Radius 220 mm / 8-11/16". 45°.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 55 mm / 2-3/16". A manual hand lever is included, or the unit can be remote controlled with the 7272/72720 control box.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 112.8 mm / 4-7/16". 13°.

Adjustable in length from 100 to 120 mm / 3-15/16" to 4-3/4" for situations where a standard section will not fit.

Length 55 mm / 2-3/16". Terminal clips included. A passing train activates the function.

R1 = 360 mm

The track bumper has an LED for a lighted lantern. Length 16 mm / 5/8". The track bumper can be screwed to the end of the track. Wood screw included.

Length 15 mm / 19/32". The track bumper can be clipped to the rails.

4 LED's, red-red, yellow-yellow

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 220 mm / 8-13/16".