Hobby & Verzamelartikelen van het thema Rails H0

Reed contact for releasing of switch processes by the moving train. For mounting directly into the track. Usable as well for 2 rail tracks or with rail between traction rails. The switch contact operates by train magnets contactless, e. g. item-No. 6841. Up to 2 A. L: 38 mm.

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

This is an improved kit for upgrading C Track turnouts. It has a double solenoid mechanism with end shut-off contacts.

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

The light mast can be plugged into the Märklin 24997 C-Track or Trix 62997 C-track . The mast signal lights up when the uncoupler track is activated. Metal mast. Height 85 mm / 3-38". This light mast is technically the same as the earlier 5113 mast.

R2 = 437,5 mm

R1 = 360 mm

R3 = 515 mm

R4 = 579.3 mm
Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

From the starter set on with TRIX C Track: The layout's operations grow.

1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

Plastic insulating rail joiners for ROCO LINE tracks.Content: 24 pieces/pack.