Hobby & Verzamelartikelen van het thema Rails H0

A frame with a buffer beam comes mounted on the track. The rails end in the roadbed.

Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.

This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings.

Red and brown feeder wires with spade connectors at both ends, for C Track. Length 2 meters / 78-3/4".

2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the 7555 reed switch. It is for freight and passenger cars.

The reed switch is for use at a suitable point with K Track or C Track. The reed switch triggers a pulse of current when a locomotive or car with a magnet mounted on the underside passes over it. The connections to the reed switch are potential-free. The reed switch has a maximum current capacity of 2 amps. Length 38 mm / 1-1/2".

R5 = 643,6 mm
Parallel curve to Radius R4 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 133 cm / 52-3/8".

R9 = 1114.6 mm
Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

This track is the same length as the length of the wide radius turnouts.

R1 = 360 mm

R2 = 437.5 mm

Removable roadbed slopes. This track section is required on both branches of the 62771 and 62772 wide radius curved turnouts.
R3 = 515 mm