Hobby & Verzamelartikelen van het thema H0 Trix C-Rail

This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings.

Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.

R1 = 360 mm

A frame with a buffer beam comes mounted on the track. The rails end in the roadbed.

R2 = 437,5 mm

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

R1 = 360 mm

R2 = 437.5 mm

Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

Removable roadbed slopes. This track section is required on both branches of the 62771 and 62772 wide radius curved turnouts.
R3 = 515 mm

This track is the same length as the length of the wide radius turnouts.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire.

R3 = 515 mm

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

R4 = 579.3 mm
Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

R9 = 1114.6 mm
Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.