Hobby & Verzamelartikelen van het thema Märklin Z mini-club

Length 220 mm / 8-5/16".

Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

1 German Federal Railroad (DB) class 89 steam locomotive, 1 DB low side car with a tarp, 1 gondola.

Radius 145 mm / 5-3/4". 45°, R1

Radius 220 mm / 8-11/16". 45°.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 55 mm / 2-3/16". A manual hand lever is included, or the unit can be remote controlled with the 7272/72720 control box.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 112.8 mm / 4-7/16". 13°.

Adjustable in length from 100 to 120 mm / 3-15/16" to 4-3/4" for situations where a standard section will not fit.

Length 55 mm / 2-3/16". Terminal clips included. A passing train activates the function.

The track bumper has an LED for a lighted lantern. Length 16 mm / 5/8". The track bumper can be screwed to the end of the track. Wood screw included.

Length 15 mm / 19/32". The track bumper can be clipped to the rails.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 220 mm / 8-13/16".

Radius 220 mm / 8-11/16". 30°. Terminal clips included. A passing train activates the function.

Length 55 mm / 2-3/16". Terminal clips included. One rail is gapped in the middle.

Radius 195 mm / 7-11/16". 30°. Terminal clips included. A passing train activates the function.

Length 25 mm / 1".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

This mast is for supplying power. It has a base plate and wires. Height 38 mm / 1-1/2"

This mast can be clipped to the sides of bridges and ramps. Height 41 mm / 1-5/8".

The tower mast has notches for attaching 8924 and 8925 cross spans. Base 7 x 13 mm / 9/32" x 1/2". Height 61 mm / 2-3/8".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Radius 195 mm / 7-11/16". 30°.

Length 108.6 mm / 4-1/4". For adjusting length on the 8559 crossing and 8560 double slip switch.

Length 110 mm / 4-3/8". Interference suppressor included. 2 permanently connected wires for track current.

Complementary curve for turnouts. 13°. Radius 490 mm / 19-1/4". Same curve as the branch on the 8562 L, 8563 R, 8565 L and 8566 R turnouts.

Contains 10 pillars. Height 4, 8, 12, 16, 20, 24, 28, 32, 36 and 40 mm / 5/32" to 1-5/8".

Length 55 mm / 2-3/16".

Length 110 mm / 4-3/8".

Radius 220 mm / 8-11/16". 30°.

Radius 195 mm / 7-11/16". 45° (R2)