Hobby & Verzamelartikelen van het thema Bedrading, stekkers, schakelaars

Diameter 2.5 mm.

This controller (momentary contact) is for semaphore/target signals, turnouts, uncoupler tracks, and relays and comes with an additional contact that serves as a track current controller for an automatic train control feature.

This controller enables automatic stops and independent startup of trains in a station, etc. The stopping time can be adjusted smoothly. This controller is not suitable for Selectrix operation!

This controller is for operating four turnouts, signals or relays (momentary contact).

Is required if many individual supply lines (eg switches, signals, lighting, etc.) have to be connected to a common pole. 2 electrically isolated terminal strips each with 6 pressure terminals, a total of 12 terminals, allowing connection of at least 24 cables!

With 3 electrically isolated pressure clamps. Especially to use when extending the signal and switch connection, but also as a small distributor plate.

Dual magnetic drive for a maximum of 14 volts AC or DC. To trigger pulse contacts are required. With limit switch.

This controller (continuous contact) is for color light signals and includes an additional contact that serves as a track current controller for an automatic train control feature.

Functie komt overeen met apparaat 7273. Alle aansluitingen met nieuwe steekverbindingen. Passende stekers meegeleverd.

For operating uncoupler tracks, or momentary power feed to isolated sections.

Netgelijkrichter voor elektrische overbrugging van isolatiepunten (bijv. Voor tegengestelde rijrichting in seindelen of in langzaam bewegende gebieden). Niet geschikt voor digitale banen.

Can be adjusted through a range of about 10 to 35 ohms (Not over 2 watts continuous operation!) By this mean the power to the locomotive is reduced in pre-determined sections of track, as for example down grades, slow zones and station approaches. Not suitable for digital operation.

∅ 2.5 mm

∅ 2.5 mm