Hobby & Verzamelartikelen van het thema Hobbyprof Modelbouw

Class Köf II small diesel locomotive with an enclosed engineer's cab. 1 type Kbs stake car with stakes that can be installed on the car. 1 type Kls flat car.

This is a set consisting of two track crossings that add many setup possibilities to the my world track assortment. The my world track sections are made of sturdy plastic just right for children.

90mm

Open goederenwagen in kleurige vormgeving.

For hanging in the tower masts. Depending on the track distance, it spans up to 4 tracks. Span 280 mm

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

DB V200.0 Diesel locomotive

1-aderige draad, diameter 0,19 mm².

All of the connections on this control box have the new plugs and sockets.Plugs to work with this control box are included.This control box works in the same manner as the 7274 control box.

The feeder wire set comes with interference suppression and overload protection. It includes a circuit board with spade connectors for C Track and a red and a brown feeder wire. One feeder wire set is needed for each conventional track circuit. One 74046 feeder wire set should be installed in each track power circuit to protect against possible radio and television interference caused by locomotives in operation. This feeder wire set also offers effective protection against overloads and short...

Swiss Federal Railways (SBB) class Ce 6/8 II "Crocodile" electric locomotive, as a museum locomotive of SBB Historic. Design from the first production series. Dark brown basic paint scheme. Standard sleeve-style buffers, end walkover plates, small switching steps, and grab irons included. Oncoming train light and Signum-Integra magnets included. Locomotive road number 14253. The locomotive looks as it currently does in real life.

1 wire for power supply. Height 97 mm / 3-7/8*.

2 wires to supply power. Instructions for setting up catenary. Height 97 mm / 3-7/8*

For hooking up signals located by tower masts and for supplying power anywhere on a layout. Length 600 mm / 23-5/8*.

This mast is for supplying power to an area of catenary and for signal blocks. It is a metal lattice mast and has a metal hanger arm. A base with a mounting screw and a slide-on connection is included. An additional base as a clip for C Track is included. Feeder wire for C Track included. Height 100 mm / 3-15/16". 1 piece.

This hanger arm is made of steel wire with hangers for contact and messenger wires. It can be installed on regular masts and on tower masts. 5 pieces to a package.

This is a bracket made of metal for mounting a 74151 single hanger arm on the 74142 tower mast. The bracket has 4 easily bent tabs for mounting the bracket on the mast. A package comes with 5 pieces.

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a package.

This interrupter is for electrical separation of the power circuit in the catenary. It can be installed at any point by cutting the catenary wire and fixing it in place in the insulated receptacles. Skids with variable holders are included for a continuous path for pantograph contact strips. 1 piece to a set.

This is a metal round mast and has a metal hanger arm. A base with a mounting screw and a slide-on connection is included. An additional base as a clip for C Track is included. Feeder wire for C Track included. Height 100 mm / 3-15/16". 5 pieces to a package.

For all crossings and double slip switches (except 2257 and 2275).

This catenary wire is made of welded steel wire. Length approximately 142 mm / 5-9/16". This catenary wire is designed for the transition from the old Märklin catenary to the new catenary system. 3 pieces to a package.

The catenary wire is made of welded steel wire. Length 167.5 mm / 6-5/8". Designed for curved track with a radius of 424.6 mm / 16-11/16" (K Track). 16 catenary wires are required for a circle, each one making up 22.5° of a curve. 5 pieces to a package.

This catenary wire is for adjustment of individual track lengths. One end has the standard eyelets for hanging the wire on a mast, and the other end has a receptacle for a cut catenary wire with an open end. The precise length can be adjusted during installation. 5 pieces to a package.

The catenary wire is made of welded steel wire. Length 172.5 mm / 6-13/16". Designed for curved track with a radius of 437.5 mm / 17-1/4" (C Track, M Track). 16 catenary wires are required for a circle, each one making up 22.5° of a curve. 5 pieces to a package.

One-time Series
Danish State Railways (DSB) steam locomotive with a tender, road number E 991. The locomotive looks as it did around 2007.

The track bumper has an LED for a lighted lantern. Length 16 mm / 5/8". The track bumper can be screwed to the end of the track. Wood screw included.

Marklin Classic
German Federal Railroad (DB) class 260 diesel switch engine. Crimson basic paint scheme. Diesel-hydraulic drive with a jackshaft. Road number 260 319-9. The locomotive looks as it did starting in 1972.

German Federal Railroad (DB) class VT 98.9 rail bus motor car and class VS 98 rail bus control car. In original crimson paint scheme. Motor car road number VT 98 9705, control car road number VS 98 306. The cars look as they did at the start of the Sixties.

1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.