Hobby & Verzamelartikelen van het thema Rails en treintoebehoren

Length 25 mm / 1".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

This mast is for supplying power. It has a base plate and wires. Height 38 mm / 1-1/2"

This mast can be clipped to the sides of bridges and ramps. Height 41 mm / 1-5/8".

The tower mast has notches for attaching 8924 and 8925 cross spans. Base 7 x 13 mm / 9/32" x 1/2". Height 61 mm / 2-3/8".

This is for the 73400 lighting kit. It has an asymmetrical pickup shoe and a ground spring.

The 72020 current-conducting coupler, which can be uncoupled, is an alternative or conversion option for the current-conducting rigid coupler drawbars in the 7319 conversion set.

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8").
2 permanently attached connecting wires.

For cars 43581-43586. The kit consists of a pickup shoe and a ground spring, a circuit board with 10 light bulbs, and a current-conducting coupler.

Same as 7330, but for shorter express train passenger cars. For cars 41351, 41361, 42383 and 42751.

For cars 4085 and 4087. The kit consists of a pickup shoe, light diffuser, 2 light sockets, and 2 light bulbs.

For cars 42101, 42131, 4214, 42141, 42142 and 4229. The kit consists of a pickup shoe and a ground spring, a light diffuser, a light socket and a light bulb.

For cars 4131, 4132 and 4133. The kit consists of a pickup shoe and a ground spring, an adjustable light diffuser, 2 light sockets and 2 light bulbs.

De stekkers en moffen zijn niet combineerbaar met de vroegere uitvoering (set art.-nr. 7130).

De stekkers en moffen zijn niet combineerbaar met de vroegere uitvoering (set art.-nr. 7130).

De stekkers en moffen zijn niet combineerbaar met de vroegere uitvoering (set art.-nr. 7130).

De stekkers en moffen zijn niet combineerbaar met de vroegere uitvoering (set art.-nr. 7130).

De stekers en moffen zijn niet met de vroegere uitvoering (set art. nr. 7130) combineerbaar.

De stekers en moffen zijn niet met de vroegere uitvoering (set art. nr. 7130) combineerbaar.

De stekers en moffen zijn niet met de vroegere uitvoering (set art. nr. 7130) combineerbaar.

Functie komt overeen met apparaat 7272. Alle aansluitingen met nieuwe steekverbindingen. Passende stekkers bijgevoegd.

All of the connections on this control box have the new plugs and sockets.Plugs to work with this control box are included.This control box works in the same manner as the 7274 control box.

The relay has 4 single-pole switches. The contacts have a 2 amp capacity. The relay can be activated by a control box, circuit track, contact track, reed switch, or digital decoder.

10 Relex coupler heads. These couplers can be used on locomotives and cars with standard coupler pockets (NEM 362).

66 Stekkers en 34 moffen. Op kleur gesorteerd bij gemiddeld gebruik.

Longer connecting cable for the 6088 and 60880 s 88 decoders. Length 200 cm / 78-3/4".

All of the connections use the new plugs and sockets.Appropriate plugs are included.These connections work the same as the 6083, 6084, and 6088 decoders.

This extension cable for the main line comes with a 9-pin socket and a 9-pin plug to connect a distantly located 60125 Terminal. Length approximately 2 meters / 79 inches.

This connector adapter is for connections from users such as lights to a switched mode power pack with a 4-pin mini DIN high current plug.

For cars 43241, 43250, 43251, 43260 and 43261. The kit consists of a pickup shoe and a ground spring, a light diffuser with light sockets, 2 light bulbs, and a current-conducting close coupler.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

R2 =radius 424.6mm. Length 1/2 = 15°.

Length 1/2 = 90 mm / 3-9/16". Momentary contact with a locomotive/car pickup shoe.

Length 1/2 = 15°.

R2 = Radius 424.6mm. Length 1/1 = 30°.

R2 = radius 424.6mm. Length 3/4 = 22° 30'.

R2 = Radius 424,6mm. Length 1/4 = 7° 30'.

Length 1/4 = 7° 30'.

Length 1/2 = 15°. Radius 424.6 mm / 16-3/4". Momentary contact with a locomotive/car pickup shoe.

Crossing angle 45°. Track length 90 mm / 3-9/16".

Crossing angle 22° 30’. Track length 168.9 mm / 6-5/8".

Length 1/1 = 180 mm / 7-3/32". 2 terminal clips for feeder wires. Only for Delta and Digital.

De stekkers en moffen zijn niet combineerbaar met de vroegere uitvoering (set art.-nr. 7130).

De stekkers en moffen zijn niet combineerbaar met de vroegere uitvoering (set art.-nr. 7130).

De stekers en moffen zijn niet met de vroegere uitvoering (set art. nr. 7130) combineerbaar.

De stekers en moffen zijn niet met de vroegere uitvoering (set art. nr. 7130) combineerbaar.

Contents: 12 curved tracks 24230, 4 straight tracks 24188, 4 straight tracks 24172. Rail junction box, switching power supply 36 VA / 230 V and mobile station for digital entry. Illustrated play book with many tips and suggestions. Expansion options with the C-track expansion packs and with the entire C-Track program.

Radius 195 mm / 7-11/16". 30°.

Length 108.6 mm / 4-1/4". For adjusting length on the 8559 crossing and 8560 double slip switch.

The feeder wire set comes with interference suppression and overload protection. It includes a circuit board with spade connectors for C Track and a red and a brown feeder wire. One feeder wire set is needed for each conventional track circuit. One 74046 feeder wire set should be installed in each track power circuit to protect against possible radio and television interference caused by locomotives in operation. This feeder wire set also offers effective protection against overloads and short...

Set screw terminals for all connections.Network cable included.

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

For usage in a NEM 362 slot.

A bright light in the cars: white LEDs.

For cars 42168, 42171, 4227, 4255-4257, 42551-42571, 4264, 4265, 4282, 4285, 4286, 4327, 4368, 4369 and 4384. The kit consists of a pickup shoe and a ground spring, a light diffuser with light sockets and 2 light bulbs. This kit can be used with the 7319 current-conducting close coupler.

This is a special circuit board with two red LEDs for the new generation of commuter cars in the Märklin H0 program (car length 28.2 cm / 11-1/8"). 2 permanently attached connecting wires.

These springs are for the 73400 or 73401 lighting kits in conjunction with the 72020 current-conducting couplers. This is a set with 5 ground springs for installation in the car trucks.