Hobby & Verzamelartikelen van het thema Controlesystemen en transformatoren

Web tension between 4 and 16 V adjustable. Light voltage 16 V. Plastic housing. Dimensions 120 x 140 x 80 mm. On / off switch on the power cable. VDE-tested.The safety transformer 32 VA is only suitable for closed rooms.

Component for programming and reading H0 locomotives with built-in c 82 decoder. Can be used in code locomotive addresses, starting voltage, and acceleration and braking delay.

This is a signal mechanism with integrated circuits for controlled stopping of digital locomotives with high-efficiency propulsion.

Functie komt overeen met apparaat 7272. Alle aansluitingen met nieuwe steekverbindingen. Passende stekkers bijgevoegd.

The relay has 4 single-pole switches. The contacts have a 2 amp capacity. The relay can be activated by a control box, circuit track, contact track, reed switch, or digital decoder.

Longer connecting cable for the 6088 and 60880 s 88 decoders. Length 200 cm / 78-3/4".

All of the connections use the new plugs and sockets.Appropriate plugs are included.These connections work the same as the 6083, 6084, and 6088 decoders.

This extension cable for the main line comes with a 9-pin socket and a 9-pin plug to connect a distantly located 60125 Terminal. Length approximately 2 meters / 79 inches.

This connector adapter is for connections from users such as lights to a switched mode power pack with a 4-pin mini DIN high current plug.

Contents: 12 curved tracks 24230, 4 straight tracks 24188, 4 straight tracks 24172. Rail junction box, switching power supply 36 VA / 230 V and mobile station for digital entry. Illustrated play book with many tips and suggestions. Expansion options with the C-track expansion packs and with the entire C-Track program.

Set screw terminals for all connections.Network cable included.

2 pole for 10 connections each side.

Central unit with built-in locomotive controller. Supplies the layout with power and control commands. The built-in locomotive controller has the same performance range as the Control 80 f. Connecting terminals for transformer and track layout. 1 connection socket for booster (item no. 6017). Operating display through LED. Output power max. 2.5 A. Dimensions 135 x 120 x 80 mm / 5-5/16" x 4-23/32" x 3-5/32".

This decoder can be installed in the C Track three-way turnout (24630) with electric mechanisms. It can be used with the digital formats Motorola and DCC. Connections are made with plug-in contacts, for Märklin and Trix C Track turnouts. An address can be set with coding switches (Motorola Format 1 to 320 / DCC Format 1 to 511), and can also be set on the programming track. Turnout lanterns can be connected and can be controlled (soldering skills required). A digital decoder can be installed...

Functie komt overeen met apparaat 7273. Alle aansluitingen met nieuwe steekverbindingen. Passende stekers meegeleverd.