Hobby & Verzamelartikelen van het thema Hobbyprof Modelbouw

Radius 145 mm / 5-3/4". 45°, R1

Radius 220 mm / 8-11/16". 45°.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 55 mm / 2-3/16". A manual hand lever is included, or the unit can be remote controlled with the 7272/72720 control box.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 112.8 mm / 4-7/16". 13°.

Adjustable in length from 100 to 120 mm / 3-15/16" to 4-3/4" for situations where a standard section will not fit.

Length 55 mm / 2-3/16". Terminal clips included. A passing train activates the function.

The track bumper has an LED for a lighted lantern. Length 16 mm / 5/8". The track bumper can be screwed to the end of the track. Wood screw included.

Length 15 mm / 19/32". The track bumper can be clipped to the rails.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 220 mm / 8-13/16".

Belgian State Railways (SNCB/NMBS) class 122 (22). Original version.

One-time Series
Dortmund Railways locomotive no. 32. Diesel-electric version of the MaK general purpose locomotive.

R3 = radius 553,9mm. Length 1/1 = 30°.

Two straight track sections, each 94.2 mm / 3-11/16". Continuous contact through wheel sets. With insulated section of rail for track occupation feedback when traversed by a train. Can be extended with regular straight or curved track sections.

This car is compatible with the blocks of all well-known manufacturers.

Een andere trein heeft voorrang! Gelukkig heb je het sein gezien. Als je wacht en tot 7 telt, dan springt het sein op groen.

R4 = radius 618,5mm. Length 1/1 = 30°.

Slanke meegebogen wissel.

2.5 mm / 3/32" high. This is used as a pillar foundation.

For K or M Track. 6 clips for mounting K Track and instructions for setting up bridges. Arch height 117 mm / 4-5/8". Length 360 mm / 14-3/16".

3 mm / 1/8" high. This base plate can be used only in conjunction with the 7250 base plate.

DB V200.0 Diesel locomotive

Radius 220 mm / 8-11/16". 30°. Terminal clips included. A passing train activates the function.

Length 110 mm / 4-3/8". Interference suppressor included. 2 permanently connected wires for track current.

Length 55 mm / 2-3/16". Terminal clips included. One rail is gapped in the middle.

Radius 195 mm / 7-11/16". 30°. Terminal clips included. A passing train activates the function.

Length 25 mm / 1".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Trains can traverse reverse loops in one direction when the reverse loop set tracks are installed in order according to their markings. This set consists of 3 separation tracks each 110 mm / 4-3/8" long and one straight section of track 25 mm / 1" long.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Complementary curve for turnouts. 13°. Radius 490 mm / 19-1/4". Same curve as the branch on the 8562 L, 8563 R, 8565 L and 8566 R turnouts.

Class Köf II small diesel locomotive with an enclosed engineer's cab. 1 type Kbs stake car with stakes that can be installed on the car. 1 type Kls flat car.

This bridge is quickly set up with its 4 sturdy pillars and allows your elevated railroad to hurtle across broad valleys. Build your play world with roads, rivers, or lakes. With your new big bridge, the Airport Express will zoom across them and provide endless play.

Length 1/2 = 15°. Radius 360 mm / 14-3/16". Momentary contact with locomotive/car pickup shoe.

R2 =radius 424.6mm. Length 1/2 = 15°.

Length 1/2 = 90 mm / 3-9/16". Momentary contact with a locomotive/car pickup shoe.

R2 = Radius 424.6mm. Length 1/1 = 30°.

R2 = radius 424.6mm. Length 3/4 = 22° 30'.

R2 = Radius 424,6mm. Length 1/4 = 7° 30'.

Length 1/2 = 15°. Radius 424.6 mm / 16-3/4". Momentary contact with a locomotive/car pickup shoe.

Crossing angle 45°. Track length 90 mm / 3-9/16".

Crossing angle 22° 30’. Track length 168.9 mm / 6-5/8".

Length 1/1 = 180 mm / 7-3/32". 2 terminal clips for feeder wires. Only for Delta and Digital.

Bavarian State Railroad (Bay.Sts.B.) class EG 2 x 2/2. Original version, later E 70.2.

Radius 195 mm / 7-11/16". 30°.

Length 108.6 mm / 4-1/4". For adjusting length on the 8559 crossing and 8560 double slip switch.

2 pole for 10 connections each side.

R2 = radius 424.6mm. Length 1/8 = 3° 45'.

Central unit with built-in locomotive controller. Supplies the layout with power and control commands. The built-in locomotive controller has the same performance range as the Control 80 f. Connecting terminals for transformer and track layout. 1 connection socket for booster (item no. 6017). Operating display through LED. Output power max. 2.5 A. Dimensions 135 x 120 x 80 mm / 5-5/16" x 4-23/32" x 3-5/32".

This can be installed anywhere on the layout under the rails.