Hobby & Verzamelartikelen van het thema Controlesystemen en transformatoren

Usable for all 2-aspect colour light home signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal pictures Hp0 and Hp1.

MSF controller/ transformer. 0–14 V=/0,55 A (550 mA) controllable DC power for track feed. 14 V~/0,5 A (500 mA) constant AC power for lighting, signals and point motors.This controller / transformer guarantees good running qualities with its multisensible speed controller and definite forwards and backwards control. It gives a definite forwards and backwards control and speed settings. Automatic overload protection. The control knob clicks gently into a zero position. Easy connection to the layout using the pressure connection clips.

Functie komt overeen met apparaat 7273. Alle aansluitingen met nieuwe steekverbindingen. Passende stekers meegeleverd.

2 pole for 10 connections each side.

Central unit with built-in locomotive controller. Supplies the layout with power and control commands. The built-in locomotive controller has the same performance range as the Control 80 f. Connecting terminals for transformer and track layout. 1 connection socket for booster (item no. 6017). Operating display through LED. Output power max. 2.5 A. Dimensions 135 x 120 x 80 mm / 5-5/16" x 4-23/32" x 3-5/32".

Contents: 12 curved tracks 24230, 4 straight tracks 24188, 4 straight tracks 24172. Rail junction box, switching power supply 36 VA / 230 V and mobile station for digital entry. Illustrated play book with many tips and suggestions. Expansion options with the C-track expansion packs and with the entire C-Track program.

Web tension between 4 and 16 V adjustable. Light voltage 16 V. Plastic housing. Dimensions 120 x 140 x 80 mm. On / off switch on the power cable. VDE-tested.The safety transformer 32 VA is only suitable for closed rooms.

The ideal large transformer for all requirements. Extremely powerful, with a short circuit indicator light for both track feed and AC feed. With multisensible speed controller and definite forwards and backwards control. Automatische overload protection. The controller gives a definite forwards and backwards control and speed settings. The control knob clicks gently into a zero position. Automatic overload protection. easy connection to the layout using the pressure connection clips.Technical data:■ Running voltage: 0–15 V= / 1.1 A■ Separate accessory output: 14 V~ / 1.0 A

Functie komt overeen met apparaat 7272. Alle aansluitingen met nieuwe steekverbindingen. Passende stekkers bijgevoegd.

Set screw terminals for all connections.Network cable included.

Suitable for St. Andrew`s cross item-No. 5058 (H0) and item-No. 5803 (N), and route indicator signals item-No. 5061 and 5062. For automatic operation the electronic relay item-No. 5552 and switching tracks resp. the reed contact item-No. 6840 (H0) are required.

This controller enables automatic stops and independent startup of trains in a station, etc. The stopping time can be adjusted smoothly. This controller is not suitable for Selectrix operation!

Component for programming and reading H0 locomotives with built-in c 82 decoder. Can be used in code locomotive addresses, starting voltage, and acceleration and braking delay.

Decoder to switch on/-off continous current for colour light signals, traction current, lighting, motors, accessories. Compatible with Viessmann Commander, Märklin Digital and Uhlenbrock Intellibox.

This decoder can be installed in the C Track three-way turnout (24630) with electric mechanisms. It can be used with the digital formats Motorola and DCC. Connections are made with plug-in contacts, for Märklin and Trix C Track turnouts. An address can be set with coding switches (Motorola Format 1 to 320 / DCC Format 1 to 511), and can also be set on the programming track. Turnout lanterns can be connected and can be controlled (soldering skills required). A digital decoder can be installed...

This is a signal mechanism with integrated circuits for controlled stopping of digital locomotives with high-efficiency propulsion.

With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, item-Nos. 4021, 4022, the signal control module item-No. 5210 and control module for colour light entry signals item-No. 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item-No. 5210 as well as the control module for colour light signals item-No. 5222.

According to item-No. 5231, single track decoder but for a Märklin C-track, three-way turnout. Controls 2 drives. Control is possible with decoders by function keys of the mobile station! Suitable for Märklin-Motorola, NMRA-DCC and Märklin systems.

Effect simulates the arc discharge of a moving train. Established with very small electronics and blue micro-LED. For easy installation in electric locomotives gauge H0.

Electronics for prototypical control of all Viessmann gas lamps in all scales. Suitable for LED lights, too. After switch-on by using push button panel the lamps start to flicker like the prototype and slowly increase in brightness. After approx. 5 seconds the lamps will reach full brightness. During operation the lamps flicker occasionally (simulates variations of the gas pressure).

The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore it is suitable for all signals scale 0 up to Z (except for the Viessmann signals with multiplex-technology).