Hobby & Verzamelartikelen van het thema Rails en treintoebehoren

Signal in standard construction, with filigree latticed brass mast, authentic varnishing and patented base socket for easy mounting. With 2 LEDs maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: Item-No. 5221. Height: 44 mm.

Netgelijkrichter voor elektrische overbrugging van isolatiepunten (bijv. Voor tegengestelde rijrichting in seindelen of in langzaam bewegende gebieden). Niet geschikt voor digitale banen.

Can be adjusted through a range of about 10 to 35 ohms (Not over 2 watts continuous operation!) By this mean the power to the locomotive is reduced in pre-determined sections of track, as for example down grades, slow zones and station approaches. Not suitable for digital operation.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire.

For operating uncoupler tracks, or momentary power feed to isolated sections.

Interference suppressor included. This track section is required as the first feeder track for each power circuit (= power pack). The feeder clips are removable.

Electric turnout mechanism left for ROCO LINE turnouts without roadbed.

Electric turnout mechanism right for ROCO LINE turnouts without roadbed.

Voor de nieuwe Marklin standaard

Length 1/1 = 180 mm / 7-3/32". Facilitates transition from K to M track.

This is an improved kit for upgrading C Track turnouts. It has a double solenoid mechanism with end shut-off contacts.

R3 = 396,4 mm. Buiten diameter 810 mm.
12 stuks nodig voor een cirkel.

R2 = 225,6 mm. Buiten diameter 468 mm.
8 stuks nodig voor een cirkel.

R1 = 192mm. Buiten diameter 401 mm.
8 stuks nodig voor een cirkel.

R4 = 430 mm. Buiten diameter 877 mm.

Lichtmast getest en werkend. Hoort bij ontkoppelrails 5112. Hoogte 85 mm. Licht van de mast gaat aan tijdens het ontkoppelen.

Decoder to switch on/-off continous current for colour light signals, traction current, lighting, motors, accessories. Compatible with Viessmann Commander, Märklin Digital and Uhlenbrock Intellibox.

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts.

Usable for all 2-aspect colour light home signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal pictures Hp0 and Hp1.

Reed contact for releasing of switch processes by the moving train. For mounting directly into the track. Usable as well for 2 rail tracks or with rail between traction rails. The switch contact operates by train magnets contactless, e. g. item-No. 6841. Up to 2 A. L: 38 mm.

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a package.

Minitrix terminals and contacts allow convenient connection of traction power supply lines (eg signal disconnects, shut-down tracks, block fuses, etc.) anywhere on the track, even in the middle of complicated switch roads.

Two-conductor wire for track power connections. Suitable as a mechanical track connector with the 14901 flex track.